AIR DRAW TEXTURISING MACHINE

MODEL : AT-801

TECHNICAL SPECIFICATION:
No. of Positions	48	64	72	80	96	104	112	120
No. of Sections	6	8	9	10	12	13	14	15

CONNECTED POWER KW
All Shaft Drive Motor KW	48	64	72	80	96	104	112	120
Miscellaneous KW	6	8	9	10	12	13	14	15
Hot Pin Heater KW	6	8	9	10	12	13	14	15
Seting Heater KW	7.2	9.6	10.8	12	14.4	15.6	16.8	18
Total KW	41.3	45.7	48.9	65.8	70.2	72.4	74.3	76.8
Machine Length (mm)	10980	13780	15180	16580	19380	20780	22180	23580

Machine Width (mm)	3180
Machine Height (mm)	2878
Mechanical Speed	800
Yarn Process Speed	700 mpm (Subject to selection)
Denier Range	Up to 1200 (Subject to Jet Selection)
Feed Creel	2 ends per position with transfer tail for both ends
Take-up Package	245 mm Traverse Bi-conical, 250mm dia up to 4000 gms content
Take-up Tube	57mm OR 69 mm dia x 290mm length
Draw Heater	Vapour Phase Hot Pin type group heater with independent temperature setting for core and effect from 110 C to 160 C
Set Heater	Vapour Phase : close contact type group heater temperature from 160 C to 240 C
Possible Process	Single, Parallel and Core – effect
Feed Yarn	POY, Nylon, Catonic, PP, PA acrylic Spun Yarn etc
Compressor Capacity	Depends on Jet Core 3.2 OR 5.5 CFM per position at 9 Kgs / CM
Water Supply	20 Ltrs Demineralised Water per position per day.

FEATURES:
(a) Equipped with four feed roller with Apron/Nip Roller. POY continues fibers such as nylon and polyster can be arbitrarily oriented. (b) ATY can be produced by over feeding the yarn into the nozzles at and arbitrary rate. All settings can be carried out with the touch panel. (c) AT-801 is available minimum 8 spindles and maximum 120 spindles depending upon the length space equipment. (d) ATY loops can be adjusted with hot pin heater & stabilizing heaters. (e) Single, parallel and core effect process is possible.
(f) Feed Yarn PP, PA, acrylics, viscose, POY and FDY. (g) ATY Machine is available with option of Slub attachment, Neps attachment.